A surveillance camera in a retail store is designed to zoom in with laser-like precision to focus on people and merchandise. A race car is designed to handle crowded straightaways and steep turns with speed and agility.

Once a lagging market segment, automotive electronics has gained significant importance in recent years, as the industry, the culture and consumer expectations have changed. Safety and regulatory requirements for vehicles have increased, manufacturers have new warranty requirements, and what used to be “luxury” features are now expected to come standard with a new car.

Engineers at a major manufacturer of portable electronic devices had a problem. They needed to rivet a small, thin electrical contact to the device’s charger subassembly, but how could they head the tiny rivets—0.02 to 0.03 inch in diameter—without crushing the assembly?

Most people never think about the electrical grid when they turn on their TV, charge their smartphone or surf the Internet. But, without it, none of those things would work.

About 300 miles northwest of Mexico City sits the town of Aguascalientes. Although its name means hot waters, the place is much more well-known for its gentle climate, brave bullfighters and being a stopover point between the mines of Zacatecas and Mexico City.

Successful manufacturers never get tired of facing new market challenges. This statement applies to companies across all industries—including those involved in the annual manufacturing of more than 1 billion tires worldwide.

The advent of laboratory automation systems has made a significant impact on clinical diagnostics, drug discovery, food and agricultural research, and forensics.

Washers are a vital component of many fastened joints. Washers are critical to the operation of virtually every device with moving parts. They perform a variety of functions beyond just securing bolts, nuts, screws and rivets. They can insulate, seal, lock, provide spacing, improve appearance, supply spring force, align parts, and distribute loads.

When an assembly process proves to be even a tad too costly—even a penny or less per cycle—a cheaper alternative must be found. This is why many manufacturers have replaced die-cut or molded solid gaskets with form-inplace (FIP) and cure-in-place (CIP) liquid gaskets.

Most rapid prototyping service providers specialize in one area of additive manufacturing, such as fused deposition modeling (FDM) or metal sintering. ZARE SrL, however, offers expertise in several areas.